Browse by themes
Themes > Bandai
Bandai 1/100 Zaku II FZ RE 100 Reborn-One Hundred 013 MS-06FZ Zeon Mass Mobile Suit
Bandai 1/100 Zaku II FZ RE 100 Reborn-One Hundred 013 MS-06FZ Zeon Mass Mobile Suit

- Zaku II reform appeared in the RE / 100 series!

- In the RE / 100 series, adopt the structure that does not use the first PC parts. Pursuing ease of assembly with KPS material.
- In addition to the head of the regular version as the original parts [Head for command] and head of [Fritz Helm] are included.
- Split up to fine parts. Realizing color coding with high reproducibility by just assembling.
- Realized expansion of movable range. In addition to pulling the chest armor obliquely forward, the cockpit block can be withdrawn forwards to avoid interference when bending forward.
- Reproduce the deployment of weapons mounting racks around the body.
- MMP - 80 machine gun, heat · hawk, hand grenades are included.

[accessories]
Heat  Hawk  1
MMP-80 machine gun  1
Hand grenade  1 set
Head for commander / head for flick helm  1 each

[Product content]
Molded product  12
Seal  1
Marking stick  1
Instruction manual  1

* All Bandai products in our store are original and genuine.

RM210.00   133.00   37%
Out of stock
more info
Bandai 1/12 Bandai KYLO REN STAR WARS THE RISE OF SKYWALKER Plastic Model Kit
Bandai 1/12 Bandai KYLO REN STAR WARS THE RISE OF SKYWALKER Plastic Model Kit

Based on the movie Star Wars: The Rise of Skywalker comes this 1:12 scale model kit of Kylo Ren.

The Star Wars: The Rise of Skywalker Kylo Ren 1:12 Scale Model Kit includes Lightsaber parts with in-motion swing effects as well as hooded and un-hooded cloak parts.

This model kit is a must have for Star Wars fans!

RM216.00   136.80   37%
Out of stock
more info
Bandai 1/12 C-3PO & R2-D2 Star Wars The Last Jedi Birthday
Bandai 1/12 C-3PO & R2-D2 Star Wars The Last Jedi Birthday

Bandai 1/12 C-3PO & R2-D2 Star Wars The Last Jedi Birthday

RM280.00   220.00   21%
Stock available
Add To Cartmore info
Bandai 1/12 Figure-rise Standard Ultraman B Type Figure-rise Standard
Bandai 1/12 Figure-rise Standard Ultraman B Type Figure-rise Standard

- ULTRAMAN [B TYPE] appeared in figure-rise Standard from [ULTRAMAN] serialized in [Monthly Heroes]!

- Silver color of the main body surface is extra finish, red color reproduces texture by gross injection.
- Newly designed LED unit that can fit in the body is included. The spesium core and both eyes can emit light at the same time. The spesium core reproduces the two colors blue and red.
- 3 types of clear parts are included as Spermium effect parts. You can produce various battle scenes.
- Spesium blades can be mounted on both sides, and Spesium slush on both hands.
- Large rifle of original design by original author · Eiichi Shimizu [Mars 133 revision] is attached.
- Various hand parts, hand grips dedicated to original arms (right) are included.

[accessories]
· Clear effect parts
(Spesium slash  2)
(Spesium blade  2)
(Spectium light ray  1)
· Original weapon [Mars 133 revision]

[Product content]
· New LED unit  1
· Molded parts  9
· Marking stick  1
· Foil seal  1
· Instruction manual 1

RM270.00   175.00   35%
Out of stock
more info
Bandai 1/12 Figure-rise Standard Ultraman B Type Limiter Release Ver. Plastic Model
Bandai 1/12 Figure-rise Standard Ultraman B Type Limiter Release Ver. Plastic Model

-From [ULTRAMAN], ULTRAMAN [B TYPE] (Limiter Canceled Ver.) That appears to shine red with the light overflowing from the Specium Core is now available from Figure-rise Standard!

-Comes with 3 types of clear parts, [Spesium Ray], [Spesium Slash], and [Spesium Blade].
-Clear red specs for the Specium effect parts to match the limiter release.
-Original weapon [Mars 133 Kai], LED unit included.

[accessories]
Original weapon [Mars 133 Kai]  1
LED unit  1 (LR41  2 sold separately)
Spesium ray effect parts  1
Specium slash effect parts  2
Spesium blade parts  2
Figure-rise Effect base  1
Foil seal  1
Marking seal  1

* All Bandai products in our store are original and genuine.

RM300.00   190.00   37%
Stock available
Add To Cartmore info
Bandai 1/12 Figure-rise Standard Ultraman Suit A Figure-rise Standard Plastic Model
Bandai 1/12 Figure-rise Standard Ultraman Suit A Figure-rise Standard Plastic Model

- [ULTRAMAN SUIT A] appeared in Figure-rise Standard from [ULTRAMAN] serialized in [Monthly Heroes]!

- Silver color of the main body surface is extra finish, red color reproduces texture by gross injection.
- An LED unit that can fit in the body is included. You can let the eyes and chest SSC generator shine.
- The chest SSC generator reproduces the two colors blue and red.
- Vertical guillotine effects parts are included.
- The original design Gauntlet by original author · Eiichi Shimizu comes as original weapon parts.

[accessories]
Original Weapon Ganttlet  2
Vertical guillotine effect parts  1
Beam Generator Parts  1
Display pedestal 1

[Product content]
Molded parts  9
Foil seal  1
Marking stick  1
LED unit  1
Instruction manual  1

RM270.00   171.00   37%
Out of stock
more info
Bandai 1/12 Figure-rise Standard Ultraman Suit Tiga Ultraman Suit Another Universe
Bandai 1/12 Figure-rise Standard Ultraman Suit Tiga Ultraman Suit Another Universe

-[New ULTRAMAN SUIT PROJECT] First! ULTRAMAN SUIT TIGA comes with [ULTRAMAN] original weapons!

-Completely drawn by Dr. Eiichi Shimizu.
-Glossy injection of red / purple armor, and silver finish reproduces the surface of the body with an extra finish.
-Original weapon Zeperion Spear is molded with clear parts.
-Reproduce the pose of the Special Move Zeperion ray in a wide range of motion.
-Also comes with effect parts to color the deadly pose.
-Comes with an LED unit that can fit in the chest. You can keep your chest and eyes on.

[accessories]
LED unit  1 (LR41  2 sold separately)
Zeperion Spear  1
Effect parts  1
Figure-rise Effect base  1
Foil seal  1
Marking seal  1

* All Bandai products in our store are original and genuine.

RM288.00   185.00   36%
Out of stock
more info
Bandai 1/12 Figure-rise Standard Ultraman Suit Ver7.5 Plastic Model Kit
Bandai 1/12 Figure-rise Standard Ultraman Suit Ver7.5 Plastic Model Kit

- From Manga [ULTRAMAN] [ULTRAMAN SUIT Ver 7.5] has appeared in figure-rise Standard!
- Silver color of the main body surface is extra finish, red color reproduces texture by gross injection.
- A dedicated LED unit is included and it is possible to shine eyes.
- In addition to the main armament of [ULTRAMAN SUIT Ver. 7.5], the author [EYE SLUGGER] of Eiichi Shimizu design comes as original weapon parts.
- [EYE SLUGGER] can be carried in both hands.
- Joint parts that can combine the two [EYE SLUGGER] are included.

[accessories]
SPACIUM SWORD  1
Sheath for SPACIUM SWORD  1
KNIFE  2
Original weapon [EYE SLUGGER]  2

[Product content]
LED unit  1
Molded article  8
Marking stick  1
Foil seal  1
Instruction manual  1

RM270.00   172.00   36%
Out of stock
more info
Bandai 1/12 FIRST ORDER STORMTROOPER STAR WARS THE RISE OF SKYWALKER Plastic Model
Bandai 1/12 FIRST ORDER STORMTROOPER STAR WARS THE RISE OF SKYWALKER Plastic Model

This 1/12 scale model kit features a First Order Stormtrooper as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit are three types of shoulder paldron parts as well as six interchangeable hand parts.

 
  • 1/12 scale
  • From Star Wars: The Rise of Skywalker
  • Made of plastic
  • Parts to build a First Order Stormtrooper 
  • Display Base
  • 3 Types of shoulder paldron parts
  • 2 Blaster 
  • Tonfa
  • Shield
  • 6 Interchangeable hand parts
  • Water decals and marking stickers

* All Bandai products in our store are original and genuine.

RM162.00   102.60   37%
Out of stock
more info
Bandai 1/12 LUKE SKYWALKER STORMTROOPER Ver A New Hope Plastic Model
Bandai 1/12 LUKE SKYWALKER STORMTROOPER Ver A New Hope Plastic Model
Bandai Hobby Division gives off a human face representation by the "Star Wars" plastic model series of NEXT MOVE "Triaxial Jet Finish" 
 
New technology, the precision of conventional plastic model fusion! 
 
Realize the print to a three-direction by the jig controlled by the development of ... dedicated jig and Triaxial Jet Finish. The molded article alone is obtained did not shadow sense of marvel of new technologies to reproduce the vitality of the surface feeling and look of the skin, the conventional ink jet printing Quality of dimensions are different, stereoscopic the expression of actors and vividly It has been reproduced. 
 
Develop and introduce new technology to surpass the figure painting techniques of the past! Products that make up the Luke Skywalker who infiltrated the Death Star in the movie of "Star Wars Episode 4 / A New Hope" in the "plastic model"! Storm Trooper helmet parts is also included!
 
Luke Skywalker in Death in the star was used to jump to the opposite side of the passage had the Princess Leia, the shape of the grappling hook that is attached to the rear belt reproduction! 
 
Height reproduction for parts also included, height difference between the Han Solo also can be reproduced! 
 
Accessories:
 
- Luke Skywalker Facial Part x 1
- Stromtrooper Helmet x 1
- Display Base x 1
- E-11 Blaster x 1
- DTL-19 Heavy Blaster Rifle x 1
- SE-14r  Short Range Combat Pistol x 1
- Hand parts x 6
- Water decal x 1
- Marking stick x 1
- Instruction Manual x 1
RM180.00   120.00   33%
Stock available
Add To Cartmore info
Bandai 1/12 R2 - D2  R2-D2 ROCKET BOOSTER VER Droid Collection Star Wars
Bandai 1/12 R2 - D2 R2-D2 ROCKET BOOSTER VER Droid Collection Star Wars
R2-D2 is making its appearance to the Star Wars 1/12 character model kit collection with all new gimmicks and functions! A new series called the "Droid Collection" will feature each droid with a specific "droid accessory" compatible with this R2-D2 kit.
Lift R2-D2's head with the Hydraulic lifting device or display R2-D2 in a floating state using the included base. 
Product Features:
- 4 inches (10.16cm)
- Made of plastic
- All new gimmicks and functions
- Compatible with other kits in the Droid Collection
- Lift R2-D2's head with the Hydraulic lifting device 
Box Contents:
- 6 Runners
- Brook's propeller rocket booster
- Hydraulic head lifting device
- Electronic bar
- Oil application arm
- Light saber
- 2 Tool stands
- Display base
- Marking sticker sheet 
RM135.00   89.00   34%
Out of stock
more info
Bandai 1/12 R5-J2 Star Wars Droid collection Plastic Model
Bandai 1/12 R5-J2 Star Wars Droid collection Plastic Model
R5-J2 is an Imperial maintenance droid stationed aboard the Death Star II that provides support and repairs. It includes a display base plus additional arm accessories for R2-D2.
 
Product Features:
- 3.60 inches (9.15cm)
- Made of plastic
- From the Star Wars franchise
- Additional accessories for R2-D2
- R2-D2 not included
 
Box Contents:
- 5 Runners
- Stickers
- Additional arm accessories (for R2-D2)
RM120.00   83.00   31%
Stock available
Add To Cartmore info
Bandai 1/12 STAR WARS BB-8 & D-O WITH DIORAMA BASE RISE OF SKYWALKER Make in Japan
Bandai 1/12 STAR WARS BB-8 & D-O WITH DIORAMA BASE RISE OF SKYWALKER Make in Japan

This 1/12 scale model kit features BB-8 and D-O as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit is a diorama display base.

 
  • 1/12 scale
  • From Star Wars: The Rise of Skywalker
  • Made of plastic
  • BB-8 specific parts to recreate movie scene
  • Parts to build BB-8
  • Parts to build D-O 
  • Diorama Display Base
  • BB-8 specific parts to recreate movie scene
  • Water decal and marking stickers
RM162.00   102.60   37%
Stock available
Add To Cartmore info
Bandai 1/12 Star Wars BB8 Bb-8 & R2-d2 The Force Awakens 4549660032205 birthday
Bandai 1/12 Star Wars BB8 Bb-8 & R2-d2 The Force Awakens 4549660032205 birthday

Bandai 1/12 Star Wars Bb-8 & R2-d2 The Force Awakens 4549660032205 birthday

RM148.00   108.00   27%
Out of stock
more info
Bandai 1/12 Star Wars HAN SOLO STORMTROOPER Ver. Model Kit A New Hope
Bandai 1/12 Star Wars HAN SOLO STORMTROOPER Ver. Model Kit A New Hope
Han / Solo Facial Parts x 1 
Storm Trooper Helmet x 1 
Dedicated Display Base x 1 
E - 11 Blaster x 1 
DTL - 19 Heavy - Blaster Rifle x 1 
SE - 14 r Short Range - Combat - Pistol x 1 
Hand Part × 6 species 
(left and right weapon possession × 2 · right and left hands × 2 · right fists × 1 · left pointing × 1) 
water transfer type decal × 1 
marking seal × 1 
assembly manual × 1
RM180.00   114.00   37%
Stock available
Add To Cartmore info
Bandai 1/12 Star Wars R2-Q2 Episode 4 New Hope droid series
Bandai 1/12 Star Wars R2-Q2 Episode 4 New Hope droid series

Astromek droid "R2-Q2" appearing in "Star Wars Episode 4 / New Hope" appears in the droid series!
-   We reproduce characteristic body color, detail with parts division and each part marking seal faithfully.
-   Dedicated display base is attached.

[INCLUDED ACCESSORIES]
-   Dedicated display base  1

[CONTENTS]
-   Molded parts  5
-   Kinousseal  1
-   Instruction manual  1

RM120.00   76.00   37%
Stock available
Add To Cartmore info
Bandai 1/12 Star Wars R2-Q5 Droid Collection Plastic Model Japan Original
Bandai 1/12 Star Wars R2-Q5 Droid Collection Plastic Model Japan Original
R2-Q5 is an Imperial maintenance droid stationed aboard the Death Star that provides support and repairs. It includes a display base plus additional accessories for R2-D2, including computer interphase arm parts as well as the drink arm parts.
Product Features:
- 3.60 inches (9.15cm)
- Made of plastic
- From the Star Wars franchise
- Additional accessories for R2-D2
- R2-D2 not included
Box Contents:
- 5 Runners
- Stickers
- Computer interphase arm parts (for R2-D2)
- Drink arm parts (for R2-D2)
RM108.00   81.00   25%
Stock available
Add To Cartmore info
Bandai 1/12 Star Wars R4-I9 Droid Accessories Galactic Empire Plastic Model Kit
Bandai 1/12 Star Wars R4-I9 Droid Accessories Galactic Empire Plastic Model Kit
R4-I9 is making its appearance to the Star Wars 1/12 character model kit collection! A new series called the "Droid Collection" will feature each droid with a specific "droid accessory" compatible with the R2-D2 kit.
This set comes with a waiter tool set equipment for R2-D2. 
Product Features:
- 4 Inches (10.16cm)
- Made of plastic
- Compatible with the R2-D2 kit
- Includes waiter tool set equipment for R2-D2
Box Contents:
- 6 Runners
- Waiter tool set equipment for R2-D2
- Display base
- Marking sticker sheet
RM120.00   82.00   32%
Stock available
Add To Cartmore info
Bandai 1/12 Star Wars R4-M9 Episode 4 New Hope Astromek Droid
Bandai 1/12 Star Wars R4-M9 Episode 4 New Hope Astromek Droid

After the opening of "Star Wars Episode 4 / New Hope", Astromek Droid of the Imperial Army detained by Brockade Runner comes up! 
-   We reproduce the body faithfully with detail by parts division and each part marking seal which imaged setting color. 
-  Dedicated display base is attached. 

Accessories
-  Display base  1 

[Item content] 
-   Sprue 6 
-   Marking seal  1 
-   Manual  1

* All Bandai products in our store are original and genuine.

RM90.00   76.00   16%
Stock available
Add To Cartmore info
Bandai 1/12 Star Wars Shadow Stormtrooper Plastic Model Kit
Bandai 1/12 Star Wars Shadow Stormtrooper Plastic Model Kit

BANDAI PLASTIC MODEL

SHADOW STORMTROOPER 1/12 scale

Black soldier who reproduces in Bandai plastic model Shadow · Stormtrooper

Commercialized black soldier Shadow · Stormtrooper on 1/12 scale Bandai Star Wars plastic model series.

Reproduce distinctive colors in molded colors and express the details with a water transfer type decal · marking sticker of exclusive color!

Weapons that extend the range of posing, hand parts, display base included! !

● COLOR

A shiny black molded color reproduces distinctive colors.

In case

● POSING

Each joint moves, enabling action pauses full of dynamism.

● WEAPON

3 types of weapons and holsters are included.

● HAND PARTS

Handed parts for right-handed, left-handed that support various poses are included.

[Accessory] E-11 Blaster  1 / DTL-19 Heavy · Blaster · Rifle  1 / SE-14r Short Range · Combat · Pistol  1 /

 Dedicated display base  1 / Hand parts  6 types (weapon holding hands  2, flat hands  2, right fists  1, left pointing 1) /

 Water transfer type decal  1 / Marking seal  1

RM144.00   101.00   30%
Out of stock
more info